Rant: Heat Transfer

The forum for ranting, raving, complaining and praising
User avatar
Swirls
gone fission
Posts: 8299
Joined: December 11 07, 4:15 pm
Location: South Korea

Rant: Heat Transfer

Post by Swirls »

I hated the course in college, and I still hate it now. Except instead of just taking heat transfer, my engineering course now is actually a combination of heat transfer, fluid dynamics, thermodynamics, and thermal hydraulics. Ugh. Engineering has killed my inner child.

And we're covering the entire course over 3 days. Three [expletive] days. We have class up through tomorrow, have Thursday off for Veteran's Day, then have our exam bright and early Friday morning at 7:00am.

Our exams are pass/fail, with 80% being the lowest acceptable passing grade. And actually if you get below a 90%, then the test score goes to your supervisor to review and "coach" you on the fact that you need to study harder because you're close to failing and they don't want you to fail a future course and have to be remediated.

EDIT: RAVE: Classwork over!
Last edited by Swirls on January 5 11, 1:30 pm, edited 1 time in total.

User avatar
cards2468
Hall Of Famer
Posts: 14745
Joined: October 28 06, 11:10 pm
Location: LOVE IT OR LEAVE IT

Re: Rant: Heat Transfer

Post by cards2468 »

Rough stuff man.

I took heat transfer last year and my professor was a hard ass (who also is a good friend of mine, so therefore he was incredibly hard on me bc he over compensated for not wanting to go easy on a friend). Hopefully you don't get stuck writing programs for analyzing different objects with different thermal conditions...

User avatar
Swirls
gone fission
Posts: 8299
Joined: December 11 07, 4:15 pm
Location: South Korea

Re: Rant: Heat Transfer

Post by Swirls »

cards2468 wrote:Rough stuff man.

I took heat transfer last year and my professor was a hard ass (who also is a good friend of mine, so therefore he was incredibly hard on me bc he over compensated for not wanting to go easy on a friend). Hopefully you don't get stuck writing programs for analyzing different objects with different thermal conditions...
No, ours is more geared towards the various stages of boiling conditions and understanding burnup and heat distribution flux profiles for the U-235 fuel pellets/bundles.

User avatar
cards2468
Hall Of Famer
Posts: 14745
Joined: October 28 06, 11:10 pm
Location: LOVE IT OR LEAVE IT

Re: Rant: Heat Transfer

Post by cards2468 »

Swirls wrote:
cards2468 wrote:Rough stuff man.

I took heat transfer last year and my professor was a hard ass (who also is a good friend of mine, so therefore he was incredibly hard on me bc he over compensated for not wanting to go easy on a friend). Hopefully you don't get stuck writing programs for analyzing different objects with different thermal conditions...
No, ours is more geared towards the various stages of boiling conditions and understanding burnup and heat distribution flux profiles for the U-235 fuel pellets/bundles.
Is it a grad course or work training?


I think soon for work I'm going to head to UCLA for a few weeks to cram in a course on composite aircraft structures for work. Kinda excited about that tho.

User avatar
Hungary Jack
Mother Earth
Posts: 19536
Joined: July 24 06, 6:03 am
Location: In Cognito

Re: Rant: Heat Transfer

Post by Hungary Jack »

Heat Transfer can be fun when women are involved.

User avatar
cards2468
Hall Of Famer
Posts: 14745
Joined: October 28 06, 11:10 pm
Location: LOVE IT OR LEAVE IT

Re: Rant: Heat Transfer

Post by cards2468 »

Hungary Jack wrote:Heat Transfer can be fun when women are involved.
primarily fluid dynamics

User avatar
Swirls
gone fission
Posts: 8299
Joined: December 11 07, 4:15 pm
Location: South Korea

Re: Rant: Heat Transfer

Post by Swirls »

cards2468 wrote:
Swirls wrote:
cards2468 wrote:Rough stuff man.

I took heat transfer last year and my professor was a hard ass (who also is a good friend of mine, so therefore he was incredibly hard on me bc he over compensated for not wanting to go easy on a friend). Hopefully you don't get stuck writing programs for analyzing different objects with different thermal conditions...
No, ours is more geared towards the various stages of boiling conditions and understanding burnup and heat distribution flux profiles for the U-235 fuel pellets/bundles.
Is it a grad course or work training?


I think soon for work I'm going to head to UCLA for a few weeks to cram in a course on composite aircraft structures for work. Kinda excited about that tho.
Sounds fun. No, mine is just my engineering initial training. All new engineers, whether you are coming in as a fresh college graduate or as a senior engineer like me, must take a five month engineering refresher course to prepare them for what they will see as engineers at a nuclear plant. Our class started in August and goes through Christmas. Everyone is trained in the basics (mechanical engineering, electrical engineering, civil/structural engineering, materials engineering, systems engineering, reactor physics, reactor safety, heat transfer/fluids/thermo, chemistry, etc), and then once the initial engineering training is complete we can begin our training for our specific engineering job function.

User avatar
Swirls
gone fission
Posts: 8299
Joined: December 11 07, 4:15 pm
Location: South Korea

Re: Rant: Heat Transfer

Post by Swirls »

cards2468 wrote:
Hungary Jack wrote:Heat Transfer can be fun when women are involved.
primarily fluid dynamics
I know my reactor operates more efficiently when my wife preheats my feedwater.

User avatar
AdmiralKird
MBA, CPA, CFA, CFP, JD, PE, MD
Posts: 10179
Joined: March 7 07, 4:50 pm
Location: Tycho Crater, Luna

Re: Rant: Heat Transfer

Post by AdmiralKird »

cards2468 wrote:
Hungary Jack wrote:Heat Transfer can be fun when women are involved.
primarily fluid dynamics
Only on a waterbed.

AWvsCBsteeeerike3
"I could totally eat a pig butt, if smoked correctly!"
Posts: 27578
Joined: August 5 08, 11:24 am
Location: Thinking of the Children

Re: Rant: Heat Transfer

Post by AWvsCBsteeeerike3 »

Swirls wrote:
cards2468 wrote:
Swirls wrote:
cards2468 wrote:Rough stuff man.

I took heat transfer last year and my professor was a hard ass (who also is a good friend of mine, so therefore he was incredibly hard on me bc he over compensated for not wanting to go easy on a friend). Hopefully you don't get stuck writing programs for analyzing different objects with different thermal conditions...
No, ours is more geared towards the various stages of boiling conditions and understanding burnup and heat distribution flux profiles for the U-235 fuel pellets/bundles.
Is it a grad course or work training?


I think soon for work I'm going to head to UCLA for a few weeks to cram in a course on composite aircraft structures for work. Kinda excited about that tho.
Sounds fun. No, mine is just my engineering initial training. All new engineers, whether you are coming in as a fresh college graduate or as a senior engineer like me, must take a five month engineering refresher course to prepare them for what they will see as engineers at a nuclear plant. Our class started in August and goes through Christmas. Everyone is trained in the basics (mechanical engineering, electrical engineering, civil/structural engineering, materials engineering, systems engineering, reactor physics, reactor safety, heat transfer/fluids/thermo, chemistry, etc), and then once the initial engineering training is complete we can begin our training for our specific engineering job function.
I hate it when they insist that engineers operating a nuclear plant aren't students that squeeked through physics II with a C by finding the final online before it was taken which is precisesly how I made it through. I agree that the material is voodoo and sucks but seriously you can't blame them for wanting you to have a firm grasp in that area (heat transfer/thermo in particular) when dealing with how reactors work...

Post Reply