RANT: VCR
Posted: August 10 09, 11:35 am
I'm at my parents' house for the next couple days. I brought my PS3 along so that I could play some MLB '09. I want to set it up in their spare room. It has a TV in it, but the TV is really old and doesn't even have AV hookups (the red/yellow/white things).
No problem, I say... I'll just run the PS3 through a VCR, and hook the VCR up to the TV with coaxial cable. No problem -- this is what I had to do all the time ten years ago when AV hookups weren't nearly as common on televisions.
I get everything set up, and realize that the channel on the VCR needs to be changed. There are buttons ON the VCR itself that say "channel up / channel down," but they don't work. They literally do not do anything. They apparently are there for aesthetic reasons. As I'm messing with this, I suddenly am overwhelmed with these terrible memories of messing with this very VCR when I was a youngster. It was a piece of ****, and was basically useless without the remote.
Unbelievably, after about 3 seconds of searching upstairs, I found the remote for it. This is remarkable, because this VCR hasn't even been at this house in this millennium. I've tried three different sets of batteries in this remote, and none of them work. Either all of the batteries are shot, or this remote is just ruined (likely).
I'll be able to hook up my PS3 elsewhere, but it would have been much less obtrusive to my family if it were in the room I was trying to hook it up in. Anyway, let's get to the point: what kind of sadistic bastard would design a device that required the VCR to do anything other than basic functions? And furthermore, WHY are there channel +/- buttons on there when they DON'T DO ANYTHING?*
*it's entirely possible the buttons actually do something, but I found the PDF of the manual online and there's no mention of how to operate it manually like that
No problem, I say... I'll just run the PS3 through a VCR, and hook the VCR up to the TV with coaxial cable. No problem -- this is what I had to do all the time ten years ago when AV hookups weren't nearly as common on televisions.
I get everything set up, and realize that the channel on the VCR needs to be changed. There are buttons ON the VCR itself that say "channel up / channel down," but they don't work. They literally do not do anything. They apparently are there for aesthetic reasons. As I'm messing with this, I suddenly am overwhelmed with these terrible memories of messing with this very VCR when I was a youngster. It was a piece of ****, and was basically useless without the remote.
Unbelievably, after about 3 seconds of searching upstairs, I found the remote for it. This is remarkable, because this VCR hasn't even been at this house in this millennium. I've tried three different sets of batteries in this remote, and none of them work. Either all of the batteries are shot, or this remote is just ruined (likely).
I'll be able to hook up my PS3 elsewhere, but it would have been much less obtrusive to my family if it were in the room I was trying to hook it up in. Anyway, let's get to the point: what kind of sadistic bastard would design a device that required the VCR to do anything other than basic functions? And furthermore, WHY are there channel +/- buttons on there when they DON'T DO ANYTHING?*
*it's entirely possible the buttons actually do something, but I found the PDF of the manual online and there's no mention of how to operate it manually like that